Seiko Protection IC 10A Protection Board For 3S 11.1V 12V 12.6V 18650 Lipo Battery
Item Name: Lipo battery protection board
Charging Voltage: 12.6V
Max. Output Current / Charging Current: 10A
Max. Output Power / Charging Power: 126W
Usage: Suitable for 3.6V,3.7V lipo battery (included 18650,26650 and other lithium polymer battery)
|Min. Value||Typical Value||Max. Value||Unit|
|Self – consumption Current||12||18||24||μA|
|Over Charge Protection Voltage||4.16||4.22||4.27||V|
|Over Charge Recovery Voltage||4.1||4.16||4.2||V|
|Over Discharge Protection Voltage||2.35||2.5||2.7||V|
|Over Discharge Recovery Voltage||2.9||3.2||3.3||V|
|Overcurrent Protection Current||18||20||22||A|
|Overcurrent Delay Time||5||10||15||ms|
|Continuous Working Current||0||10||10||A|
|Continuous Output Power||0||126||126||W|
Excellent PCB design, excellent workmanship
Japan Seiko lithium protection IC,perfect protection function
The United States MOS tube, low resistance, low loss
Alloy resistance, high temperature resistance and stability
Strictly according to the diagram wiring 0V, 4.2V, 8.4V, 12.6V, do not deliberately short circuit.
After connecting the line need to be charging activated before the output.
Discharge test, the voltage drop of the fastest group of batteries is the bad battery.
When three groups of batteries are connected in series, please ensure that the voltage of each battery is the same. If not, please charge each battery separately and then use it in series.
Do not mix the good battery and the bad battery.
3 battery capacity / internal resistance of the closer the better!
1x Protection Board